The Operating Instructions of Garden Lawn Mower

Remote Garden Lawn Mower Preparation Before Start-up

• Be sure to confirm the tightness of the screws of each part before starting work.  

• Turn on the power button switch of the machine, pull down the right control lever backwards and hold it, then press the open button of the remote control to turn on the remote control.  

• When the remote control is turned on, there will be a "drop", which means that the machine matches the remote control normally.  

 Engine Start

• Pull the brake on the right round head handle of the engine (and also disconnect the flameout switch).  

• Turn the left throttle counterclockwise to the end (in order to open the engine valve at the same time)  

• Do not open the dashboard power button (open the power button to start the engine will work hard, and then turn on the power switch after the engine starts)  

• Pull the hand, pull the rope hard to start the engine  

• After starting the engine, timely adjustment of the throttle to the appropriate speed  

• Operate the remote control to mow the grass.

Remote Control Instructions

D ≤ R switch (size rudder): adjust the machine walking speed (factory default for high-speed gear) left joystick control machine back and forth walking, right joystick control machine left and right turn. 5 channel (two-stage switch): knife head lifting, adjust the cutting height of the knife head. (After adjusting the height, remember to return to the position of the segment switch to prevent burning the elevator motor) rudder fine-tuning (left and right adjustment): When adjusting the walking speed of the machine, the electric adjustment inside the machine will emit a "drip" sound, then you can use the "rudder fine-tuning "button until there is no sound from the electric adjustment inside the machine. Throttle trim (up and down adjustment): the same principle as the "rudder trim" button. Power switch: push up to open the remote control, pull down to close the remote control.